Introduction Properties Advantage Of Using Nanotechnology Manual And Maintenance Safety And Package
Manufacturers use adhesives to fabricate numerous filter components - to assemble the filter media itself, bond the filter media into a frame or install the gasket. Filter manufacturers long have used PVC plastisols as an adhesive and to cast. They require no mixing and can be pumped directly from a drum. They also cure through exposure to high heat for at least 10 minutes. Low viscosity of the glues is considered as a drawback which makes the glue useless. Nanoparticles are able to promote the viscosity of PVC glues by acting as nano-fillers.
This product is PVC glue with below technical features.
filereader.php?p1=main_e58da29fdf35e5f21
The viscosity of this product was evaluated according to the international standard "Standard Test Method for Viscosity by Ford Viscosity Cup" number ASTM D1200 and its results are according to the following table:
(Viscosity (cSt 
4120Control Sample
5457Nano Sample
Clean substrate of all contamination such as oil, dirt and grease. Dry it thoroughly after cleaning. Inject the glue on copes with special pumps, and put it into a stove. It should be stored indoors in the original, unopened and undamaged containers in a dry place at temperatures between 20-30 ℃. Under the above mentioned storage conditions the Filter Gum will be stable until 6 months.
It is available in 25 Kg tins and 250 Kg tanks.
Opinion
Reply to Return
Security code